White Knight WM126VB Bedienerhandbuch

WM126VWM126VSWM 126VBWASHING MACHINEINSTRUCTION MANUALPlease read this instruction manual carefully before you use this product

PROGRAM KNOBWith the program knob, you can select the program with which you desire to wash yourclothes. You can adjust the program selection process

PROGRAMDETERGENTCOMPARTMENTMAX DRYLOADCAPACITY(kg)PROGRAMTIME(MINS)ENERGYCONSUMPTION (kWh)WATERCONSUMPTION(litres)TYPE OF LAUNDRY EXPLANATIONS1-COTTON

PROGRAMDETERGENTCOMPART.MAX DRYLOADCAPACITY(kg)PROGRAM TIME(MINS)ENERGYCONSUMPTION (kWh)WATERCONSUMPTION(litres)TYPE OF LAUNDRY EXPLANATIONS13-SPORT C

Note: You can use fabric softeners in all programs (except spin and drain programs) as required. Please use the quantity ofsoftener as recommended by

SECTION 5: WASHING YOUR LAUNDRY Plug in the machine. Switch on the power. Connect the hoses to the water supply and to the drain. Open the water t

Putting detergent into the machineThe quantity of the detergent that you will put in your machine depends on the followingcriteria: Your detergent c

Changing the program If you have selected a program and you do not want it to continue: Press the start/pause button. Turn the program knob to the

SECTION 6: MAINTENANCE AND CLEANING Unplug your machine. Close the water tap.WATER INLET FILTERSOn the tap part of your machine’s water inlet hose

WARNING!Danger of being scalded!Since the water inside the pump maybe hot, wait for it to cool.DETERGENT DRAWERDetergents may form sediment in your de

THE CABINETClean the exterior surface of the cabinet of your machine with lukewarm water and acleaning substance that will not damage the cabinet. Aft

CONTENTSSECTION 1: BEFORE USE Safety warnings RecommendationsSECTION 2: INSTALLATION Removal of transportation screws Foot adjustment Electri

SECTION 7: PRACTICAL INFORMATIONAlcoholic beverages: The stain point should first be washed with cold water,than wiped with glycerine and water and th

Mould: Mould stains should be cleaned as soon as possible. The stain shouldbe washed with detergent and if it does not disappear, it should be wiped w

FAILURE PROBABLE CAUSEMETHODS OFELIMINATIONYour machine does notoperate.It is unplugged.Insert the plug into thesocket.The fuse is blown. Change the f

FAILURE PROBABLE CAUSEMETHODS OFELIMINATIONYour machine is vibrating.There is a small amount ofclothes in the drum.It does not preventoperation of the

FAILURE PROBABLE CAUSEMETHODS OFELIMINATIONThe washing result is notgood.Clothes exceeding themaximum capacity havebeen filled in yourmachine.Put the

FAILURE PROBABLE CAUSEMETHODS OFELIMINATIONThe spinning process isnot done or starts withdelay.No failure. Theunbalanced load controlworks in that way

FAILURECODEFAILUREINDICATORPROBABLEFAILURETHE PROCESSTO BE DONEErr 02The program readylight blinks.The water level inyour machine isbelow the heater.T

FAILURE CODEFAILUREINDICATORPROBABLEFAILURETHE PROCESS TOBE DONEErr 05The start/pause lightand program endlight blink.The heater of yourmachine or the

SECTION 10: INTERNATIONAL WASHING SYMBOLSWashingtemperature.Do not wash(hand wash)Lukewarm iron. Medium hot iron.Hot iron. Do not iron. Do not tumble

SECTION 1: BEFORE USESAFETY WARNINGS Do not use a multiple socket or extension cable. Do not connect a plug with a damaged cord into a socket. If

 If you plan not to use your machine for a long time, unplug it, shut off the watersupply and leave the door open in order to keep the inside of the

 You can level your machine by adjusting its feet. First, loosen the plastic adjustment nut away from the cabinet base. Change the level by adjusti

Cold water inletDRAIN CONNECTION The drain hose should be mounted at a minimum height of 60 cm and a maximumheight of 100 cm from the floor. The e

SECTION 3: TECHNICAL SPECIFICATIONSWM126VWM126VSWM 126VBMaximum dry laundry capacity (kg) 6Recommended loading (kg) 5,5Height (cm) 85Width (cm) 59,6De

SECTION 4: CONTROL PANELWM126V- WM126VS- WM126VB 1 2 3 4 5

START/PAUSE BUTTONUsed to start a selected program or pause during running.Note: The program knob must be brought to the O(off) position before select